Thanks, i always thought they drew more than that.
Regards
Stuart


Bob Blick wrote:
>
> At 07:42 AM 9/19/99 +1000, you wrote:
> >Thanks for that I'll give it a try. Do you know aprox what sort of
> >currents a mother board would need to draw on it's power rails, I'm
> >running a P100 but have no documentation for the motherboard.
>
> Hi Stuart,
>
> I tested my motherboard a lot. There is almost no load on anything but the
> +5 volts. About 4.5 amps with a P90. With a P133 or AMD K5-75 only 3.75
> amps. Those were with bus and voltage settings as specified by the
> individual chips(I know the K5 was VRE voltage and the P133 was standard,
> but I forget what the P90 wanted) 50mhz bus on the K5, 60 mhz for the P90,
> and 66 mhz for the P133.
>
> The motherboard is an old Tyan Titan III(lots of chips!)
>
> Cheers,
> Bob