I've already replied privately to Dave, but here's an
abbreviated note to the list.  I've got a list of books
on Printed Circuits and soldering at:

http://www1.fatbrain.com/FindItNow/Services/home.cl?from=KJA623&store=2

I've been reading "Printed Circuits Handbook" by Clyde Coombs
and "Printed Circuit Board Design Techniques for EMC Compliance
by Mark Montrose, both of which I've found extremely helpful.

Warning and disclaimer: I get some infinitessimal kickback
on books bought through that link; link straight to
http://www.fatbrain.com or http://www.amazon.com if
you're uncomformatble with that.

--Bob

On Sun, Sep 12, 1999 at 07:29:35PM +0200, John Maud wrote:
> Bishops Graphics, perhaps?
>
> My guess is that it will be somewhat out of date, but no doubt covers
> some good fundimentals.
>
> (phew, I musy be showing my age here, to remember good ol' tape 'n pads
> and light tables!)
>
> John
>

--
============================================================
Bob Drzyzgula                             It's not a problem
bob@drzyzgula.org                until something bad happens
============================================================
        http://www.drzyzgula.org/bob/electronics/
============================================================