At 12:13 3/09/99 -0600, you wrote:
>http://www.westecauto.com/TechInfo/tcodes/Ford/Ford.html
>
>gives Ford codes.  Just searched a bit online....come on guys....gals...it
>isn't that hard to find things is it?
>
>
>On my GM truck, you simply short two connectors and read the code as it
>flashes the check engine light.
>Can't recall Ford, because when I had a Ford, I borrowed a scan tool
>
>


Undotunatly, that (On the older ones) only sneds out the current MSE (Most
Significant Error), if uou where to use a 4K7 resistor to connect the links
you will get the 160baud full error set, and then if you where to use a 10K
resistor you will get the lean rich test :-) (Won't get that stuff on line!)
P.S Be very careful when attempting this ass sometimes the PWM to the fule
pump is in the same connector

Dennis