Below is a recent message to me regarding my
http://www.dontronics.com/dt106.html page and the product presented
there.

> Brian Dennis wrote:
> Dear Don,
>               It was with great interest that I read your latest web
> page entry on the DT106SMP board. As you know I am already using this
> board and as far as I knew wasn't having any problems. As it turned
> out I was. The 'Lock-out' problem as mentioned in my last letter (
> 31/8/99 ) turns out to be connected with the pin 11 isolation problem.
> After cutting pin11 on both of my boards this fault disappeared.
> I also had a problem with the green led remaining on whenever the
> switch on my DT001 was in the LOAD position. The unit seemed to
> program alright and I put this down to a internal chip thing? This
> also seems to have been cured, although one of my boards still very
> faintly illuminates the green led. The F877's on both of my boards are
> soldered in, so cutting the track to pin 11 was impossible. I simply
> cut the pin off the chip altogether. The faintly glowing led i'm still
> putting down to a internal chip thing?
>             Once again your web page has saved the day. Keep up the
> excellent work and I wish you all the best.
> Kind regards
>     Brian Dennis

Wasn't there some talk about this pin 11 business on the PIClist
recently.
Am I confused? If I wasn't, I am now. :-)

Don McKenzie  mailto:don@dontronics.com http://www.dontronics.com

Don's Download Dungeon:   http://www.dontronics.com/download.html
Australian Electronics Ring http://www.dontronics.com/aering.html
Win $500USD Cash. Micro design contest:  http://www.simmstick.com