You can buy it from me, $25 in single quantity.
I just provide the chip, you provide the connectors.
It's intended to be put in your PCB.

                          /"\
Friendly Regards          \ /
                           X  ASCII RIBBON CAMPAIGN
Octavio Nogueira          / \ AGAINST HTML MAIL
===================================================
nogueira@propic2.com                  ICQ# 19841898
>From the creator of ProPic, ProPic 2 now much better
New ProPic 2  homepage:      http://www.propic2.com
PIC Programmer for Windows with down to earth price
===================================================
-----Mensagem Original-----
De: root <root@PROF.PMMF.HU>
Para: <PICLIST@MITVMA.MIT.EDU>
Enviada em: Sexta-feira, Setembro 03, 1999 08:11
Assunto: Re: [OT] Embedded keyboard controller product


> Hi,
>
> I am also interested. How to obtain it?
>
> Regards,
> Imre
>
>
> On Thu, 2 Sep 1999, Octavio Nogueira wrote:
>
> > If you are interested in PC keyboard to RS-232 I have
> > the solution.
> >
> >                           /"\
> > Friendly Regards          \ /
> >                            X  ASCII RIBBON CAMPAIGN
> > Octavio Nogueira          / \ AGAINST HTML MAIL
> > ===================================================
> > nogueira@propic2.com                  ICQ# 19841898
> > >From the creator of ProPic, ProPic 2 now much better
> > New ProPic 2  homepage:      http://www.propic2.com
> > PIC Programmer for Windows with down to earth price
> > ===================================================
> > -----Mensagem Original-----
> > De: Brent Crosby <brent@CRYSTALFONTZ.COM>
> > Para: <PICLIST@MITVMA.MIT.EDU>
> > Enviada em: Quarta-feira, Setembro 01, 1999 06:55
> > Assunto: [OT] Embedded keyboard controller product
> >
> >
> > > Piclist:
> > >
> > >   I am looking for a source of keyboard controllers for
> > > a friend.
> > >
> > >   Basically it would be a PIC or 8051 or AVR that
> > > scans a membrane keyboard and sends the keys back
> > > as RS-232 data to some host. Probably a 4x4 matrix
> > > would be fine.
> > >
> > >   I would like to find a source of pre-programmed,
> > > documented chips (or small PCBs), and it seems that
> > > someone out there was making them.
> > >
> > >   I know it is a simple project, but I'm up to my ears in
> > > simple projects!
> > >
> > >   Any suggestions?
> > >
> > >
> > >                                 Sincerely,
> > >                                 Brent A. Crosby
> > >
> > > | Brent A. Crosby
> > > | Crystalfontz America, Incorporated
> > > | 15611 East Washington Road
> > > | Valleyford, WA 99036
> > > | voice (509) 291-3514 facsimile (509) 291-3345
> > > | http://www.crystalfontz.com brent@crystalfontz.com
> > >
> >
> >
>