On Sun, Aug 22, 1999 at 08:23:16PM -0400, Bob Drzyzgula wrote:
>
> There is a PostScript printout of it in 2x scale at
> ftp://ftp.drzyzgula.org/pub/electronics/adap28.ps.
> (Ghostview seems to do fine with it and will show it in
> color.

First, Ken Pergola was so kind as to convert my PostScript
file into a pdf (someday I really have to cough up the $30
for the Acrobat writer...).  It's available at
ftp://ftp.drzyzgula.org/pub/electronics/adap28.pdf

Also, it was suggested to me that it should be possible
to route such an adapter one-sided. I don't see any way
to do this without making the board bigger and/or the DIP
width non-standard, or making the traces a lot thinner
and the grid maybe down to 10 mils or so (it's routed
on a 50-mil grid right now; with a 25-mil grid I was
able to get rid of a few vias but not all). Thoughts
from the routing geniuses out there?

--Bob

--
============================================================
Bob Drzyzgula                             It's not a problem
bob@drzyzgula.org                until something bad happens
============================================================