>>I use AMP connectors from Digi-Key to allow use of a DIP device (either a
>>JW PIC or the Mathias) on a SMT board.  Use a 20-pin for an 18, and a 30
>>for a 28.  If you need the p/n, holler.
>
>Part numbers would be nice--I'm having trouble picturing this.

I only had this available right handy:

        Use A3253-ND for the DIP side of a 28-pin device.

The mating one is A3252 I think.  Use the same "family" for 18 pins (it's a
20-pin connector.

Didn't have a DK catalog handy on this machine.

Andy

==================================================================
Andy Kunz               Life is what we do to prepare for Eternity
------------------------------------------------------------------
andy@rc-hydros.com      http://www.rc-hydros.com     - Race Boats
andy@montanadesign.com  http://www.montanadesign.com - Electronics
==================================================================