The Micro-bRISC Device Programmer freeware software has been updated to
support the following flash
PICmicros:

PIC16F83, PIC16F84, PIC16F84A

(the freeware version also supports these PICmicros: PIC16C61, '62, '64,
'65, '71, '73, '74, & PIC16C84)

The Micro-bRISC Device Programmer is controlled via the parallel port, but
actual programming is done via a PIC16C57 PICmicro running at 20 MHz.

This is one of the fastest PICmicro programmers around. Programming a
PIC16C77, for example, only takes 8 seconds! And that includes an automatic
blank check and verify.

The freeware HEX file to program into the PIC16C57 is available at:
http://www.vgernet.net/kenetic/Firmware/

The Win95/Win98 software (Version 3.6) is available at:
http://www.vgernet.net/kenetic/Micro-bRISC%20software/Windows%2095%20&%2098/

The Micro-bRISC schematic can be obtained at:
http://www.vgernet.net/kenetic/PDF%20documentation/       schematic.PDF


The Micro-bRISC is different. The software is very easy to use and
graphical. Check it out.

Feel free to peruse the ftp area at:  www.vgernet.net/kenetic


If you have any questions, feel free to e-mail me at: kenetic@vgernet.net

Best regards,


Ken Pergola