Larry Woods wrote: > > I need to be able to dial a phone number, connect to a computer and dump > some data. > > Simple? If so, where do I find the software/hardware to do it? There is no way you can get cheaper or easier than using the Scenix application note : http://www.scenix.com/virtual/modem/modem.html It is a full 1200Baud FSK modem compliant with the Bell-202 specification. You get the code and all you need to get it going. It was designed to work on the demo board you get when you buy the complete ICE and programmer for around $300. -- Friendly Regards /"\ \ / Tjaart van der Walt X ASCII RIBBON CAMPAIGN mailto:tjaart@XXXXXX.co.za / \ AGAINST HTML MAIL |--------------------------------------------------| Company name removed to indicate that my views are my own, and does not reflect those of my employers. I believe in free speech and freedom of expression. |--------------------------------------------------|