I am trying to program a 16f84 using PIX with a simple programmer that I
have built and was designed by John Hansen. The program seems to see
something on the serial port because when the programmer is not
connected I get an error when I erase the pic. I get an error though
when I try to blow the program area, I get the message  PIC=1000  3000
wanted, 3000 is the first number in the program I am trying to load. I
think the programmer is assembled correctly because it only contains
about 9 components and I have double checked the circuit several times.
Does anyone have any thoughts or ideas on this subject?
Thanks,
Nuri