Thanks Myke. Also thanks for al the other great work you done.

/Ake


----- Original Message ----- 
From: Myke Predko <myke@PASSPORT.CA>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: den 12 juli 1999 05:28
Subject: Re: 16F84 with two serial channels


> Hi Ake,
> 
> I noticed this request from two weeks ago (and no responses to it).
> 
> You might want to check out my latest article for
> 
> http://www.rentron.com
> 
> as it has a simple macro for a single channel UART like serial interface.
> This could be very easily converted to a dual channel interface.
> 
> myke
> 
> -----Original Message-----
> From: Ake Hedman <akhe@BRATTBERG.SE>
> To: PICLIST@MITVMA.MIT.EDU <PICLIST@MITVMA.MIT.EDU>
> Date: Wednesday, June 30, 1999 5:54 PM
> Subject: 16F84 with two serial channels
> 
> 
> >I'm about to code a protocol converter using a 16F84. For this I need two
> serial channels at 2400 baud. Has anyone any code laying around for this.
>  Yes I know I', lazy..... ;-)  )
> >
> >Regards
> >/Ake
> >
> >======================================================================
> >Ake "Dot" Hedman - Yet Another Programmer (YAP)
> >Brattberg, Gamla Brattbergsskolan, S-820 50 LOOS, SWEDEN
> >Phone: +46 657 413420      Fax: +46 657 10612
> >WEB: http://www.brattberg.se    Personal: http://www.brattberg.se/ake
> >Carpe diem quam minimum credula postero
> >======================================================================
> >
>