I have three of the Hummingbird spread spectrum modems from Xetron that have been going non stop now for about 2 years with no problems. The evaluation kits that came with enclosures were $800 each. Craig Lee wrote: > Check out RFM. They may have a 2.4 GHz solution by now. > > Their TR series hybrid transceivers are pretty awesome even at $12 CAN each > (low vol), > and they can support data rates 2x that of the linx modules. > > The linx modules cost us $50 CAN each for just the transmitter or the > receiver > and they insisted that we purchase the development kit for a few hundred > before > we were allowed to purchase the modules. Not so with RFM, and I can > purchase them > from the local Insight rep, instead of through the painfully slow US/CAN > customs route. > > The RFM transceivers are .28 x .40 x 0.08 inches. The linx modules are > significantly > larger at 1.3 x 1.1 x 0.2 inches for the transmitter and 2 x 1.2 x 0.5 > inches for the > receiver. > > The only advantage I see that the Linx modules have over the RFM units is > that Linx > can transmit audio just as well as data and it can be digitally tuned on the > fly to > one of 8 channels. The RFM modules use fixed saw technology thus only fixed > freq. > are available. > > Craig > > > -----Original Message----- > > From: pic microcontroller discussion list > > [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Barry King > > Sent: July 13, 1999 1:36 PM > > To: PICLIST@MITVMA.MIT.EDU > > Subject: Re: OT: Looking for small 2.4 GHz TX RX pair > > > > > > > Hi ,I'm looking for a small 2.4 GHz TX - RX pair for a PIC based project > > > I'm working on. > > If it has to be 2.4 GHz for world-wide use, you could try Digital > > Wireless. Sorry I don't have the URL. I've been testing them, they > > only sort of work, but it might still be me... > > > > If you can go to 900 MHz (US only), try the modules from Linx. > > www.linxtechnologies.com > > Cheaper, Simpler, seem to work. > > > > Regards, > > > > Barry. > > ------------ > > Barry King, KA1NLH > > Engineering Manager > > NRG Systems "Measuring the Wind's Energy" > > Hinesburg, Vermont, USA > > barry@nrgsystems.com > > "The witty saying has been deleted due to limited EPROM space" > >