Excellent, thank you.
Gaston.

Bob Drzyzgula a icrit :
>
> There are PC-104 specific connectors. There are a few makers,
> one of them being Methode -- http://www.methode.com . You
> can download an Acrobat pdf of the official PC-104 specification
> from the PC-104 consortium's website. Their website is at
> http://www.pc104.org, the spec download page at
> http://www.pc104.org/specs/specs.htm .
>
> The header has a female socket above the board, with long,
> matching pins below the board. Just like on the ISA bus,
> there is one segment that is the 8-bit core of the bus,
> with another optional segment that is the 16-bit extension.
>
> --Bob
>
> On Sat, Jul 03, 1999 at 01:59:32PM -0500, Gaston Gagnon wrote:
> > Does anyone knows who sells the kind of connectors used to stack boards
> > as used by the PC/104 format.
> > It is a header that is both male and female at the same time
> > (hermaphroditic ? ;)
> >
> > You can see it on Fig 2    http://www.lvp.nl/ampro/pc104tec.html
> >
> > Thank you
> > Gaston
>
> --
> ============================================================
> Bob Drzyzgula                             It's not a problem
> bob@drzyzgula.org                until something bad happens
> ============================================================