There are PC-104 specific connectors. There are a few makers,
one of them being Methode -- http://www.methode.com . You
can download an Acrobat pdf of the official PC-104 specification
from the PC-104 consortium's website. Their website is at
http://www.pc104.org, the spec download page at
http://www.pc104.org/specs/specs.htm .

The header has a female socket above the board, with long,
matching pins below the board. Just like on the ISA bus,
there is one segment that is the 8-bit core of the bus,
with another optional segment that is the 16-bit extension.

--Bob

On Sat, Jul 03, 1999 at 01:59:32PM -0500, Gaston Gagnon wrote:
> Does anyone knows who sells the kind of connectors used to stack boards
> as used by the PC/104 format.
> It is a header that is both male and female at the same time
> (hermaphroditic ? ;)
>
> You can see it on Fig 2    http://www.lvp.nl/ampro/pc104tec.html
>
> Thank you
> Gaston

--
============================================================
Bob Drzyzgula                             It's not a problem
bob@drzyzgula.org                until something bad happens
============================================================