Sorry - I'm not sure if I gave enough info.  Go to
http://www.geocities.com/SiliconValley/Sector/3863/interface_description.html
also, it describes the operation.  The reason why I bring up a receiver when you
are asking for a transmitter is that it looks like this project just samples the
IR signal at specific intervals, and forms that series of bits into 6 bytes for
the computer.  I imagine it would be a simple process of storing those bits and
replaying them...  But I haven't looked at the code, so I don't know.

-Adam

Adam Davis wrote:
>
> There is a remote control receiver meant for  computer control, called IRMAN.
> It uses a PIC to receive the signal, and sends a number of bytes which are
> generally unique to that button on that remote.  It does not use any specific
> brand or type of remote or encoding, it works with all remotes at or about 40k
Hz
> modulated IR.
>
> http://www.geocities.com/SiliconValley/Sector/3863/infrared.html
>
> I hope this helps!
>
> -Adam
>
> varney wrote:
> >
> > IR controller app and discussions have surfaced on the PIC List before.
> > However I have an application whereas I would like to use a PIC (unknown
> > part number as of yet) to learn IR commands from other remotes and recall
> > them later.
> >
> > Example: from the TV remote I would like to read and store, the channel,
> > volume and power signal. From the VCR I would like to store the power, play,
> > and pause signals, from the stereo the power, volume, play and stop signals.
> >
> > I would like to store and recall about 20 or so commands from different
> > remotes.
> >
> > Can I do a sample at a very high pulse count and store this info in EE. Then
> > output the same pulse count when a button is pressed.
> >
> > I have looked at universal learning remotes, this is not what I want.
> >
> > any ideas please?
> >
> > Gordon Varney