Darrel Johansen wrote:
> Dennis Plunkett wrote:
> > 1/ Include a prototype area..
> > 2/ Include on board voltage regulation..
> > 2a/Include a power status L.E.D (Comfort factor)
> > 3/Include a serial port simple MAX 232...
> > 4/ Use a DIP type package.. in a socket!
> > 5/include some extra goodies for ICP...
> > 6/Include very good documentation..
> > 7/Provide software to configure and programme the thingy...
> > 8/Provide a RESET button!...
> > 9/Use a normal leaded crysta...l
> > 10/Make sure that all the pads are large..

> Sounds like the demo board that comes with MPLAB-ICD!  :-)

Also sounds like:
http://www.dontronics.com/dt106.html

Don McKenzie  mailto:don@dontronics.com http://www.dontronics.com

Don's Download Dungeon:   http://www.dontronics.com/download.html
Australian Electronics Ring http://www.dontronics.com/aering.html
Win $500USD Cash. Micro design contest:  http://www.simmstick.com