On Thu, 17 Jun 1999 11:29:34 -0700, you wrote:

>Greetings All:
>We have been looking for a super low power display for showing battery and
>memory status on a battery powered data logger.
>Present solution is to flash LEDs for a few mS over ten seconds or so, but
>this will still drain a battery fairly quickly--not acceptable.
Depends on the battery... 
1mA can light a low-current LED (low current, not high intensity)
plenty bright. Let's say a 10mS flash every 10 secs, that's an avarage
of 1uA - unless you're using small coin cells that's not exactly a
lot...