> James Newton wrote:
>
> Ok, this may be a dumb question but I really have looked everywhere for the an
swer and I just
You don't get dumb questions - only dumb answers.

> don't find it. On an SMD 52 pin PQFP scenix SX52BD, how do I tell what pin is
number 1? If you
> hold the package up, with the text "SCENIX /n SX52BD/PQF /n 9910" horizontal,
there is a dot on
> the top of the package in the lower left corner. I ASSume that pin one is on t
he bottom edge at
> the left.
>
>   | | | | | | | | | | |
> =  SCENIX        =
> =  SX52BD/PQF=
> =  9910            =
> = o                   =
>   | | | | | | | | | | | |
>  ^
> pin 1 right?
Looks right to me. I would also email them if I were you though...

--
Friendly Regards          /"\
                          \ /
Tjaart van der Walt        X  ASCII RIBBON CAMPAIGN
mailto:tjaart@wasp.co.za  / \ AGAINST HTML MAIL
|--------------------------------------------------|
|  Cellpoint Systems SA    http://www.cellpt.com   |
|--------------------------------------------------|
|     http://www.wasp.co.za/~tjaart/index.html     |
|             WGS84 : -26.0124 +28.1129            |
|             Voice : +27 (0)11 2545100            |
|--------------------------------------------------|