Russell McMahon wrote:
>
> I've just (probably) obtained a development job whose main parameters
> are:
>
> CHEAP AS POSSIBLE
> 4 x 8 bit A2D required
> CHEAP AS POSSIBLE
> 2 PWM outputs (fast as possible/slow as necessary)
> CHEAP AS POSSIBLE
> Variable frequency square wave output
> Essentially real time multi-tasking.
>
> Also, the whole job must be as cheap as possible :-)
>
> While there are many nice processors available which would do the job
> well most seem to fail the prime directive (ie cheap as ..).

Contact the guys @ Scenix. The volume pricing (10k) I got
was real good, but at 50k you could probably do even better.

Remember you also save on the Xtal if you use the internal
osc. The SX key is dirt cheap too.

--
Friendly Regards          /"\
                          \ /
Tjaart van der Walt        X  ASCII RIBBON CAMPAIGN
mailto:tjaart@wasp.co.za  / \ AGAINST HTML MAIL
|--------------------------------------------------|
|  Cellpoint Systems SA    http://www.cellpt.com   |
|--------------------------------------------------|
|     http://www.wasp.co.za/~tjaart/index.html     |
|             WGS84 : -26.0124 +28.1129            |
|             Voice : +27 (0)11 2545100            |
|--------------------------------------------------|