[My message snipped, tim's message included]

> I WANT TO RESPOND ON YOUR SUBJECT OF
> servo control for positioning using rheostat if i trade info will u help
> me?
> with pic programers and use there of?
> can u help i know servo positon ways of systems and accuracy??

This is probably going to swing way off topic....

Well, I'd like to help but, I have a "recent" knowledge of the PIC
environment that spans about 6 months. My domain is the PICStart programmer
and a few of Microchip's proto boards, as well as the prototypes for my
projects. Unfortunately, my mode of operation in the PICList is largely
questions since I don't have a lot of answers yet (although I may have made
a few contributions).

Which brings me to a dilemma. True, I've asked for help. True, there should
be some form of reciprocation however, I'm not in the same league as most of
the PICList members and I am usually very hesitant to post a question. I
always peruse the archives and do a few days of Web searches before I come
to the masters, and even then, I hesitate - largely because these folks
worked hard to get the knowledge they have and I'm in no position to ask for
a handout (should have been an EE and not an ME I guess, and now I've hit
the epitome of atrophy - marketing ;))

Now, yes tim, I can try to help but, there are others out there that are
probably more qualified.

Which brings me to my next point. For those that contribute to the list, I
appreciate the wealth of information that you've contributed and posses.
Through the combination of the PIC-related books, stuff like Tony Nixon's
PicNPoke, the archives, and the constant barrage of daily posts, I've
learned to solve a lot of my problems.

I suppose if someone were looking for marketing help....never mind (although
Microchip may need some).

-DO