Harold,

Harold Hallikainen wrote:

>         I'm working on a project where the PIC will run at 3V.  It is
> unclear from the instructions for the PICMASTER as to whether I can run
> it at 3V.

that is the problem with picmaster  it is not going to work
with 3Volts. I think what you should do use  5 volts  when you
get your project done try it on real part .

> Can I just set the jumper on the probe for external (as
> opposed to +5VSYS) and run it from the target 3V supply?

 picmaster wouldn't run .

> Also, the
> project will be using an RC oscillator.  I've only used the probe with
> the internal clock.  Can I just set the probe to external and have it use
> the RC on the target?

yes you can do that.

>
>
> Thanks!
>

you welcome

>
> Harold
>

Andre Abelian

>
> Harold Hallikainen
> harold@hallikainen.com
> Hallikainen & Friends, Inc.
> See the FCC Rules at http://hallikainen.com/FccRules and comments filed
> in LPFM proceeding at http://hallikainen.com/lpfm
>
> ___________________________________________________________________
> You don't need to buy Internet access to use free Internet e-mail.
> Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
> or call Juno at (800) 654-JUNO [654-5866]