At 03:15 PM 5/15/99 -0700, you wrote: >Sorry for the slightly off topic post. > >A while back, when it didn't matter to me :), >there was a brief discussion on software which >would enable the combining of multiple circuit >board images on a single panel. I have a board >which is about 1.5" x 1.75", ( Yes it uses a PIC). > >I would like to make a large panel with a number >of boards per panel. Can anyone point me to >software, Preferably freeware or shareware, >which will allow copy and paste editing of >Gerber files or some other way of accomplishing >this task? Company called "ECAM" has some good stuff that is down loadable from their web site. You'll need to track down the URL though. This is a demo/stripped version of the professional system our board house uses. How about a simple copy and paste in you layout program? **************************************************************************** ******** All legitimate attachments to this email will be clearly identified in the text. Please note our new address and phone numbers. William K. Borsum, P.E. DASCOR P.O.Box 462885 Escondido, CA 92046-2885 V&M&F) 760-796-7785 Direct) 760-796-7788