At 20:06 3/05/99 -0600, you wrote:
>It is interesting however that MPLAB now has support for these
>devices, but the programmer rejects programming.

MPLAB also interfaces with the PROMATE programmer and this
will program serial eeproms. This is why there is support for
them in MPLAB.

>Is it possible to purchase Seepic, and have it interface to
>MPLAB then?

Unfortunately MPLAB does not interface to SEEPIC to the best of
my knowledge.

Jim



>Craig






>> -----Original Message-----
>> From: pic microcontroller discussion list
>> [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Jim Robertson
>> Sent: May 3, 1999 7:41 PM
>> To: PICLIST@MITVMA.MIT.EDU
>> Subject: Re: Picstart Plus
>>
>>
>> At 18:05 3/05/99 +0800, you wrote:
>> >Does anyone else know how to do this?
>> >Thanks
>> >
>>
>> No, no one does because it cannot be done. The picstart plus does
>> not program
>> serial eeproms. That is the long and short of it.
>>
>> Jim
>>
>>
>> >>
>> >>
>> >> > Does anyone know if the Picstart Plus can programme Microchip's
>> >> > memory devices?
>> >> > Thanks
>> >> >
>> >> > --
>> >> > JUSTIN GRIMM
>> >> > Eclipse Energy Systems
>> >> > Email - eclipse@coastlink.com.au
>> >> >
>> >> As far as I know, the short answer is Yes.
>> >>
>> >> there is a file in MPLAB called EEPROM.INC that you need to indicate
>> >> to MPLAB that you are programming an EEPROM, and there might be a
>> >> setting in the "Processor" window of the Picstart+ to
>> indicated the actual
>> >> chip number, but picstart has both serial, and parrallel programming
>> >> capability and should be capable of handling the project.
>> >>
>> >>                         Grey
>> >
>> >--
>> >JUSTIN GRIMM
>> >Eclipse Energy Systems
>> >Email - eclipse@coastlink.com.au
>> >
>> ________________________________________
>> Email: newfound@pipeline.com.au
>> http://www.pipeline.com.au/users/newfound
>> WARP-3 SALE now on. $48USD with world delivery.
>> MPLAB compatible PIC programmers and firmware
>> upgrades for many programmers.
>> ________________________________________
>>
>
________________________________________
Email: newfound@pipeline.com.au
http://www.pipeline.com.au/users/newfound
WARP-3 SALE now on. $48USD with world delivery.
MPLAB compatible PIC programmers and firmware
upgrades for many programmers.
________________________________________