My long goal is to built a serial interface board that include a pic, one
RS232 line to communicate with the PC and four RS232 to communicate to the
target system ( 4 units).  The pic's job will be to direct communication to
unit 1 when it sees the command "UNIT1" and to unit 2 when it sees the
command "UNIT2" and so fort.

At 09:37 AM 5/3/99 +0530, you wrote:
>Why do you need a PIC for this ? Just connect the TX and RX line together and
>you receive the same bytes that are transmitted ;-)
>
>Pailoor
>
>Aidi Moubhij wrote:
>
>> Hi,
>> I'm looking for code that will allow the 12C508 to receive data serially
>> from the PC.  The 12C508 will store 5 bytes in the buffer after that the
>> 12C508 will transmit the 5 bytes out back to the PC, then repeat the task
>> again.
>> Does anybody have code that do this.  Thanks.
>> Aidi Moubhij
>>
>> aidi@mjr.com
>
>--
>=================================================
>For Embedded Controls Solutions and Custom Designs
>
>CHIP TECHNOLOGIES - Member, Microchip Consultant Program
>Bangalore - INDIA
>
>Email   : chiptech@vsnl.com
>Webpage : http://business.vsnl.com/chiptech ( updated 16th April 1999 )
>
Aidi Moubhij

aidi@mjr.com