Along with that, the (fried) PIC too for breakfast ;-)

Pailoor

Graham Daniel wrote:

> Daniel Wilke wrote:
> >
> > Has anyone the knowledge to remove the copybitprotection from a 16c54?
> >
> > Mvh
> > Daniel Wilke
> > daniel.wilke@swipnet.se
>
> You will need a 22.5 volt supply capable of supplying a minimum of 1.5
> amps, hook up a 10,000 uf capacitor in parallel to this supply and apply
> 0 volts to pin 14 and 22.5 volts to pin 5. Turn power on for 10 seconds
> and the copy protection will be destroyed !
>
> regards,
> Graham Daniel.
> --
> Steam engines may be out of fashion, but when you consider that an
> internal combustion engine would require recovery of waste heat by
> transfer just before top dead centre then fashion becomes rather
> redundant, USE STRATIFIED HEAT EXCHANGERS ! and external combustion.
>
> You heard it first from: Graham Daniel, managing director of Electronic
> Product Enhancements.
> Phone NZ 04 387 4347, Fax NZ 04 3874348, Cellular NZ 021 954 196.

--
=================================================
For Embedded Controls Solutions and Custom Designs

CHIP TECHNOLOGIES - Member, Microchip Consultant Program
Bangalore - INDIA

Email   : chiptech@vsnl.com
Webpage : http://business.vsnl.com/chiptech ( updated 16th April 1999 )