found another error i made the inc
should be
incf counter,1 ;*************increment digit counter*********************


result of my attempt to solve this:

       LIST P=16F84,c=90,n=0,f=inhx8m

        #INCLUDE "P16F84.INC"

        __CONFIG _CP_OFF & _XT_OSC & _PWRTE_ON  & _WDT_OFF

PORT_A        EQU    05h
PORT_B        EQU    06h
trisa                EQU    85h
trisb                EQU    86h
discagem      EQU    13h

;---------------------Pgm bits I/O ----------------------------------

#define rele1 PORT_B,0
#define rele2 PORT_B,1
#define led PORT_B,3
;--------------------------------------------------------------------
start:            movlw B'00000000'
                    movwf INTCON
                    clrf PORT_B
                    clrf PORT_A
                    bsf STATUS,rp0
                    movlw   0x00
                    movwf trisb
                    movlw   0xFF
                    movwf trisa
                    bcf STATUS,rp0
                    goto wait_flash

telefone1:
  addwf PCL,f  ;***********have to use loop counter***********

                   dt 2,3,8,1,8,4,1,0ffh            ;the number will be
dialing
                                                                ; just
realize the first number of the table (number 2)
;----------------------------------------------------------

wait_flash:  btfsc PORT_A,0       ;wait to gate
                    goto wait_flash
                   movlw 0x00 ;************initialise counter***********
                   movwf counter ;************the digitcounter**************

                   bsf led                      ;led on
                   bsf rele1                   ;get the phoneline
                   call DLY_3SEG


;--------- started to dialer -------------------------------

main:  movf counter,0  ;***********load counter into w ************
  call telefone1              ;call the table
                   movwf discagem
incf counter,1 ;*************increment digit counter*********************


inic1:           bsf rele2
DISC_1:     bcf rele1
                    bcf led
                    decfsz discagem,1
                    goto go_dialing
                    goto end_num
go_dialing: call MS_33
                    bsf rele1
                    bsf led
                    call MS_33
                    goto DISC_1

end_num:   bcf rele2                    ;phoneline off
                    call MS_66

                    goto main


    -----Original Message-----
    From: Anbar <anbar@WN.COM.BR>
    To: PICLIST@MITVMA.MIT.EDU <PICLIST@MITVMA.MIT.EDU>
    Date: Saturday, May 01, 1999 5:26 PM
    Subject: May look-up tables don't works


    Hi all !
    I am trying to do a phone dialing with the pic, and I don't get that
works.
    It just executes the first number of my look-up tables( num. 2). as it
proceeds
    telefone1:  addwf PCL,f
                       dt 2,3,8,1,8,4,1,0ff   ; number it to be dialing.
    I have expense a long time with this, and it doesn't work.
    How the remaining of the numbers is not placed to proceed in the look-up
tables?
    Can anybody help me?
    I will be very thankful.

    look may codes