No problem. I should be able to modify it.
Thanks.

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Bernhard Kraft
Sent: Sunday, April 18, 1999 2:01 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: I2C implementation on 16C73a


On Tue, 20 Apr 1999, Gerhard Fiedler wrote:

>i've seen software to use the parallel port as a logic analyser for $30 or
>so, probably there's something free out there, too -- that would help you
>have a look at the lines. (if you don't have a digital scope but a normal
>one, often it helps to run a command repeatedly, so you can trigger on it
>and see something on a normal scope.) and you might also be able to find a
>program to use the parallel port as an i2c master (or even slave).
>

As is already wrote here, I've used the parallel port to simulate an i2c
master. But the program I wrote myself isn't very user-friendly. I just
change the source and run it in Borland C++ (for DOS) so you would have
own Borland C++ and know a little bit about programming. If you want this
program send me a mail ... and i will send you the program and the circuit
i used.

===================================================================
Kraft Bernhard aka. Krufti              /"\
ICQ# 3672982                            \ /  ASCII RIPPON CAMPAIGN
                                         X   AGAINST HTML MAIL
                                        / \
===================================================================