Hi all,
When using the PULSIN instruction, are the (10uSec.) units measured based
on the oscillator or an internal timer?  I'm using a 3.58Mhz resonator;
should I assume each 10uSec unit is actually 10uSec * 1.173 (4.0Mhz/3.58Mhz)
or 11.73uSec?
John
______________________________________________________________________________

John Leonard, instrument technician                        Electron Hacker
College of Science & Engineering                           Bit Banger
Saginaw Valley State University                            Bassist
University Center, MI USA  48710                           Dad
_____________________________________________________________________________