Andy, checkout the attached page and its links. Mark > -----Original Message----- > From: pic microcontroller discussion list > [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Jeff Jolie > Sent: Friday, March 12, 1999 1:21 PM > To: PICLIST@MITVMA.MIT.EDU > Subject: > > > Andy, > > American National Standard: > > ANSI/EIA/TIA-232-3-1991; Approved: July 10, 1991. > > Inside the EIA-232 standard's cover is: > Electronic Industries Association > Engineering Department > 2001 Pennsylvania Avenue N.W. Washington, D.C 20006 > EIA Standards Sales Department 202-457-4966 > > Not sure if it's posted on the web someplace. > > Jeff Jolie > New England Automated > Machine Engineering, Inc. > jeff@neame.com > > > -----Original Message----- > > From: pic microcontroller discussion list > > [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Andy Kunz > > Sent: Wednesday, March 10, 1999 8:08 AM > > To: PICLIST@MITVMA.MIT.EDU > > Subject: > > > > > > At 02:52 PM 3/9/99 -0800, you wrote: > > >Hello everyone, > > > I need to find out where on the internet i can get the > > >specifications for sony style remote controles, and I dont know what > > >tocall it, but i need the protocal which RS232 hardware uses. > > you know the > > >standard UART protocal. I specifically need timing diagrams. thanks for > > >the help. > > > > For all the remotes I've done, I've always found it best to use a > > scope and > > capture the waveform, then regenerate it. > > > > ANdy > > > > > > \-----------------/ > > \ /---\ / > > \ | | / Andy Kunz > > \ /---\ / Montana Design > > /---------+ +---------\ http://www.montanadesign.com > > | / |----|___|----| \ | > > \/___| * |___\/ Go fast, turn right, > > and keep the wet side down! > > > Content-Type: application/octet-stream; name="IR Remotes Page.url" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="IR Remotes Page.url" Attachment converted: wonderland:IR Remotes Page.url (????/----) (0002C1B9)