Andy,

American National Standard:

ANSI/EIA/TIA-232-3-1991; Approved: July 10, 1991.

Inside the EIA-232 standard's cover is:
        Electronic Industries Association
        Engineering Department
        2001 Pennsylvania Avenue N.W.   Washington, D.C 20006
        EIA Standards Sales Department 202-457-4966

Not sure if it's posted on the web someplace.

Jeff Jolie
New England Automated
Machine Engineering, Inc.
jeff@neame.com

> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Andy Kunz
> Sent: Wednesday, March 10, 1999 8:08 AM
> To: PICLIST@MITVMA.MIT.EDU
> Subject:
>
>
> At 02:52 PM 3/9/99 -0800, you wrote:
> >Hello everyone,
> >        I need to find out where on the internet i can get the
> >specifications for sony style remote controles, and I dont know what
> >tocall it, but i need the protocal which RS232 hardware uses.
> you know the
> >standard UART protocal. I specifically need timing diagrams. thanks for
> >the help.
>
> For all the remotes I've done, I've always found it best to use a
> scope and
> capture the waveform, then regenerate it.
>
> ANdy
>
>
>    \-----------------/
>     \     /---\     /
>      \    |   |    /          Andy Kunz
>       \   /---\   /           Montana Design
> /---------+   +---------\     http://www.montanadesign.com
> | /  |----|___|----|  \ |
> \/___|      *      |___\/     Go fast, turn right,
>                                and keep the wet side down!
>