Emilio Carlos da Palma wrote:
> 
> Hi!
> 
> Does PIC16C74B implement fully I2C specification (Philips I2C specification)?
I has enough hardware to implement an I2C slave. 
The master function is best done in code, and is very easy.

> Has it implemented broadcast address or reserved addresses? The data sheet
> tells nothing about.
The I2C slave hardware is 'dumb'. You have to set up the address etc.

Beware : I2C slaving on the PIC is not a walk in the park.

-- 
Friendly Regards          /"\
                          \ /
Tjaart van der Walt        X  ASCII RIBBON CAMPAIGN
mailto:tjaart@wasp.co.za  / \ AGAINST HTML MAIL
|--------------------------------------------------|
|                WASP International                |
|R&D Engineer : GSM peripheral services development|
|--------------------------------------------------|
| Mobile : tjaart@sms.wasp.co.za  (160 text chars) |
|     http://www.wasp.co.za/~tjaart/index.html     |
|Voice: +27-(0)11-622-8686  Fax: +27-(0)11-622-8973|
|          WGS-84 : 26¡10.52'S 28¡06.19'E          |
|--------------------------------------------------|