On Wed, 17 Feb 1999 16:34:15 -0800 GregH <greg@ZIRCON.COM> writes:

>I do not have the prescaler turned on.
>
>I initialize TMR0 with the following code:
>
>movlw   b'00000000'
>option

This setting turns the prescaler on to the timer with a value of 2.  If
the PSA bit is 0, assigning the prescaler to the timer, the timer can run
with prescale of 2, 4, 8, 16, 32, 64, 128, or 256.  In order to use the
timer without any prescaler, set the PSA bit to 1, assigning the
prescaler to the WDT.  If you want to keep the WDT time the same, set the
other bits to 0 so WDT has a 1:1 prescale.  Set OPTION to 00001000.


___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]