Keith Causey wrote:
>
> I have the sx key and its associated software. Disapointingly it does not
> generate a hex file or anything that can be easily converted to an intel hex
> file.

Hi Keith,

You need to assemble the code (CTRL-A), then go to Run, Device, and
Save. This will allow you to save a .SXH file, which is Intel Hex
format, with the fuse config values embedded at 0x1010 and 0x1011.
Fluffy will happily read this format.

Cheers,

Ben

/***************************************************************\
* Ben Stragnell             * ben@codepuppies.com               *
* 3D Programmer             * ben@left.com                      *
* Left Field Productions    * http://www.codepuppies.com/~ben   *
\****************************************************************/