Gentlemen;
I have an P7575.  When I first acquired it, I tried to use the drivers
under win 3.1.  They were horrid.  Most every fascet of the plot was
flawed.  I found a third party driver kit that serves a whole list of HP
plotters, and have had fantastic luck.  The driver has never wiped out on
me, and furthermore, the latest version does true type fonts.

WinLine plotter driver software
Software Mechanics Pty Ltd
Australia 61 7 371 9499
or
US distributor
Design Automation 602-955-2223

My notes say that these are not for NT, but that may have changed by now.

Chris Eddy, PE
Pioneer Microsystems, Inc.

Mike DeMetz wrote:

> > Depends.  I was making PCB's with AutoCad, and it worked fine.  There
> > are windows plotter drivers for the HP7475 around, Either native to
> > Windows or on the web.  Most Windows software will simnply talk to
> > the plotter driver.  I would carefullly check your software and your
> > version of windows and see if you can configure the right driver
> > before spending money.
> >
> Be aware if you run NT that it only has drivers for HPGL/2, not for the
> older HPGL.
> --
> Mike DeMetz
> N9GEZ
> Elkhart, IN