> Depends.  I was making PCB's with AutoCad, and it worked fine.  There
> are windows plotter drivers for the HP7475 around, Either native to
> Windows or on the web.  Most Windows software will simnply talk to
> the plotter driver.  I would carefullly check your software and your
> version of windows and see if you can configure the right driver
> before spending money.
>
Be aware if you run NT that it only has drivers for HPGL/2, not for the
older HPGL.
--
Mike DeMetz
N9GEZ
Elkhart, IN