What exactly does the Pick up ?? Is it an op. amplifier and a photodiode,
that filters all the other freqs. ?? I have one of 38KHZ, should I use one
of 36Khz ??
What should I see on the LCD if I build it ??
Bye
Javier

-----Mensaje original-----
De: Ray Doerr <rrdoerr@HOME.COM>
Para: PICLIST@MITVMA.MIT.EDU <PICLIST@MITVMA.MIT.EDU>
Fecha: Lunes 18 de Enero de 1999 19:29 p.m.
Asunto: Re: Antwort: Re: RC5 infrared protocol


>    The IR emitter I used is DIGI part # 160-1061-ND or Liteon Part #
>LTE-5208A.  There are many IR led's on the market to choose from, you
>shouldn't have any troubles finding one.
>
>Thanks Ray
>
>-----Original Message-----
>From: Thomas.Magin@HELLIGE.DE <Thomas.Magin@HELLIGE.DE>
>To: PICLIST@MITVMA.MIT.EDU <PICLIST@MITVMA.MIT.EDU>
>Date: Monday, January 18, 1999 11:34 AM
>Subject: Antwort: Re: RC5 infrared protocol
>
>
>Hi Ray,
>
>I would really appreciate to get your code, especially for the receiver
>based on the 16F84. What kinds of infrared photo diodes do you use ?
>
>Thanx
>
>Thomas
>=8-)
>
>
>
>
>
>
>Ray Doerr <rrdoerr@HOME.COM> am 17.01.99 19:37:25
>
>Bitte antworten an pic microcontroller discussion list
>      <PICLIST@MITVMA.MIT.EDU>
>
>An:    PICLIST@MITVMA.MIT.EDU
>Kopie:
>
>Thema: Re: RC5 infrared protocol
>
>
>
>
>    I have done a fair amount of work recently on IR.  Some sites where I
>found information related to IR protocols and manufacturers codes are list
>at the end of this Email.  Note, not all the documents found at these sites
>are 100% accurate, but after you read a fair number of them you will be
>able
>to figure out which are accurate and which are not.
>    I have wrote some code for a 16F84 that will decode a Sony TV remote
>control, this was done with about 110 words of code.  I also wrote some
>code
>for a IR transmitter using a 12C509.  The transmitter simply uses a 12C509,
>IR led, and one resistor.  This is the only parts required, other than a
>power source which could be a battery or something else.  The Transmitter
>simulates a 40Khz signal in software.
>    If any one is interested in the Source code and Circuit diagram please
>Email me directly and I will try to help.
>
>The IR link is
>http://falcon.arts.cornell.edu/~dnegro/IR/
>
>
>
>-----Original Message-----
>From: Marcos Migliorini <marcosm@SICOAR.COM>
>To: PICLIST@MITVMA.MIT.EDU <PICLIST@MITVMA.MIT.EDU>
>Date: Sunday, January 17, 1999 10:26 AM
>Subject: RC5 infrared protocol
>
>
>Hi to all!
>Some body have information about RC5 infrared code protocol?, or another
>protocol for a simple infrared fan control with 8 vel. and on/off.
>
>Thank in advance