Which end of the cable did you break off the pin(s)? on the DIP end? I did the same thing a few months ago. I simply replaced the machined pin socket. I dont remember if I had added my own in addition to theirs or if it came that way. Alan -----Original Message----- From: Ry Lato To: PICLIST@MITVMA.MIT.EDU Date: Tuesday, January 19, 1999 6:34 AM Subject: Trying to find replacement for ICEPIC EMULATOR cable (FC-40P-to DIP40) >I purchased an ICEPIC emulator from Custom Computer Sales about 2 months >ago. I broke a few of the pins on the cable that connects the PIC >daughter card to my test circuit. After calling them, they told me they >do not sell replacements connectors. The manufacturer is in the UK, and >I would rather not go through the trouble of placing an international >mail order and waiting for it to get to me from the UK. >The assembly consists of a ribbon cable, a machined pin DIP header >(40pin), with a female socket connector on the oppossite end with the >lettering FC-40P. I have searched my Digi-Key and Mouser catalogs trying >to find a match with no luck. Perhaps someone has a source they can >recommend. Thanks! > > >______________________________________________________ >Get Your Private, Free Email at http://www.hotmail.com >