At 05:20 PM 1/6/99 -0500, you wrote:

>>I am looking for a commercial source for high voltage transformers with a
>secondary output voltage of 1500 volts and a secondary
>>current of 200mA into a 10k load.  The primary voltage could be 120 volts
>and the operating frequency can be 60Hz or any other
>>specific frequency above that (less than 20KHz).

Well, I'd start by looking into a plate transformer as others have
suggested. Next in line would be a microwave oven high voltage
transformer... The one for the magnetron. I've used these for vacuum tube
tesla coils in the past, and are  quite good. They have plenty of current,
and are usually 1500 - 2500 volts.

Brad - bstockda@wvu.edu