Dwayne,

>First, check out the documentation - it describes all the jumper settings.
>Its in a help file that was copied to the install directory where you
>installed MPLAB.  Note: if you have an old copy of MPLAB, you WON'T have
>either the help file OR MPLAB support for SIMICE.  I'm using 3.99.23 and
>both the help file and SIMICE support are there (I've used it!).
>
>The help file is named: README.SII (ASCII text).
>
>I really don't know what else to suggest - it simply worked for me the first
>(and only) time I tried it.  What kinds of problems are you having?
>
>dwayne
>
>
>Dwayne Reid   <dwayner@planet.eon.net>
>Trinity Electronics Systems Ltd    Edmonton, AB, CANADA
>(403) 489-3199 voice     (403) 487-6397 fax



Thank you for your responce. You are of course right. My problem was
 the fact that I was using a 12C509 and the jumper settings that I needed
 just happened to be for that particular part. Thanks again.

Best regards,
Steven

Steven Kosmerchock
CELWAVE
Phoenix   Arizona   USA
Email:  steve.kosmerchock@celwave.com
www.geocities.com/researchtriangle/lab/6584



---- PICLIST(a)MITVMA.MIT.EDU's Message ----