On Tue, 22 Dec 1998, Scott Shidel... wrote:

> I was wondering if there are any precautions or curcuity that should be
> placed between the output pins of the PIC and a D/A converter.  It is not

The DAC0800 needs nothing between it and the PIC outputs but you can use
220R resistors (low watts) on each data line during development. They
should not matter at PIC speeds (the DAC0800 has 80nsec settle time ?).

I have driven two DAC0800s from the same PIC (XY display on scope) and it
works.

Peter