On Sun, 13 Dec 1998, Michael J. Ghormley wrote:

> Scott Shidel... wrote:
> >         btfss   STATUS, C
>
>         BTFSC   STATUS,C        ; skip if CARRY bit is clear
>         GOTO    UNO             ; CARRY bit is set so go to Uno
>

heh, no, thats one of the parts of the program that works..up at the top
of the program i just made some pointers, and it jumped to the correct
pointer just fine.  I just cant figure a way to get from a subroutine at
the beginning of the program to the end

here is the error message from trying to build the program in my previous
post...
Error[113]   D:\DAQ\BOOK\DECIS.ASM 31 : Symbol not previously defined
(Idle)
Error[113]   D:\DAQ\BOOK\DECIS.ASM 35 : Symbol not previously defined
(Uno)
Error[113]   D:\DAQ\BOOK\DECIS.ASM 39 : Symbol not previously defined
(Dos)
Error[113]   D:\DAQ\BOOK\DECIS.ASM 43 : Symbol not previously defined
(Tres)
Error[113]   D:\DAQ\BOOK\DECIS.ASM 47 : Symbol not previously defined
(Quatro)
Error[113]   D:\DAQ\BOOK\DECIS.ASM 48 : Symbol not previously defined
(Cinco)


-----------------------------------------------------------------------
                The Pinto Page:  www.eng.usf.edu/~shidel
                   Join the Ford Turbo Mailing List!
                  http://www.FindMail.com/list/turbo/
Scott
-71 Pinto, stock 2.3 turbo, 13.67@98, radials
        8.1@85 1/8th mile on slicks
-85 Merkur 13.764@98 on radials&3300lbs! Under $300 in mods!
------------------------------------------------------------------------