You could always upgrade to a ClearView Mathias. It works very well on NT. :) We will even give you a trade-in allowance. The key to proper operation under NT is to use standard system calls or provide a ring 0 driver to access hardware. We provide ring 0 drivers for parallel port access with our Memory emulators and use standard system calls for SERIAL port access for the ClearView Mathias. Jerry Merrill www.tech-tools.com sales@tech-tools.com At 03:22 PM 12/1/98 +0100, you wrote: >Hi folks, > >as far as I know unfortunately there still seems to be no support for >Windows NT! Neither for PICMaster nor for the new MPLAB-ICE. > >I've complained at Microchips' representatives about this for years, but >my impression is that Microchip doesn't think that it's necessary >supporting Windows NT (regardless what they tell you). > >Best regards / Saludos >Marc Schmaeche > >----------------------------------------------------------------------- > DESCON Informationssysteme GmbH > > Dipl.-Ing. M.Schmaeche Tel.: +49 (0)9131 691145 > Abt. Elektroniksysteme Fax: +49 (0)9131 691166 > Am Weichselgarten 7 E-Mail: mailto:schmaeche@descon.de > 91058 Erlangen, Germany (German/English/Spanish welcome) >----------------------------------------------------------------------- >NO SPAM PLEASE!!! Please do not use my E-mail address for advertising. >----------------------------------------------------------------------- > >> Will >> >> I had the same problem and was never able to solve it. I tried >> everything I could think of including posting a question on this list. >> The general consensus of opinion was that it just doesn't work. I am >> waiting for the NT compatible version of PICMaster. >> >> Steve >> >> -----Original Message----- >> From: William M. Smithers >> To: PICLIST@MITVMA.MIT.EDU >> Date: Tuesday, December 01, 1998 9:30 AM >> Subject: PICMaster Trouble on WinNT 4.0 >> >> >My PICMaster Plus works just fine on a Win95 machine, >> >but when I plug it into NT, it can't see the >> >serial port. I'm pretty sure I've got the IRQ's, handshaking, >> >etc correct, but nada. Anybody else seeing this, or >> >is just my NT configuration? >> > >> >-Will >> > > Jerry Merrill jerrym@tech-tools.com www.tech-tools.com FAX: (972) 494-5814 VOICE:(972) 272-9392 TechTools PO Box 462101 Garland, TX 75046-2101