Ohtsji, Randie wrote
>Hello,
>
>I have seen a few implementations of generating CRC values but I wanted
to
>know if there is some known values which can be used to check if the
CRC
>algorithm is correct, as all the routines I have come across generate
>different CRC values.
>
>For example, if the CRC is to be generated on a single byte, in this
case
>the value 'FF', what should the CRC value be?
>
>Also, if the CRC is to be generated on a string of bytes, such as,
'A0',
>'FF', '05', '02', '00', 'DE' etc. what should the end CRC value be?
>
>I am looking for a list inputs and outputs from a known good CRC-16
>generator.
>
>I think the poly for CRC-16 is X16, X15, X2, and X0.
>
>I am trying to do this on a 16C63.
>
>Any help would be appreciated.
>
>Randie
>randie.ohtsji@glenayre.com
>

Hi, i develop a CRC-16 rutine for a modbus (MODICON) RTU protocol.
If you need this please mail me at facundo.cestona@ieee.org.


   Facu*

http://www.geocities.com/soho/lofts/3803


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com