Just a thought. Other lists that I am subscribed to append the unsubscribe instructions to each and every message, 2 lines at most. Mark Willis wrote: > > Tjaart van der Walt wrote: > > > > Virtual wrote: > > > > > > Unsunscribe me please, i sent my message to the lsit server, but it > > > didn't take i guess > > > > You didn't do it right then, I guess. > > > > Perhaps you should try again. > > Check your return address. > > No-one on the list can unsubscribe you. > > > > -- > > Friendly Regards /"\ > > \ / > > Tjaart van der Walt X ASCII RIBBON CAMPAIGN > > mailto:tjaart@wasp.co.za / \ AGAINST HTML MAIL > > > > |--------------------------------------------------| > > | WASP International | > > |R&D Engineer : GSM peripheral services development| > > |--------------------------------------------------| > > |SMS mailto: tjaart@sms.wasp.co.za (160 chars max)| > > | http://www.wasp.co.za/~tjaart/index.html | > > |Voice: +27-(0)11-622-8686 Fax: +27-(0)11-622-8973| > > | WGS-84 : 26¡10.52'S 28¡06.19'E | > > |--------------------------------------------------| > > Folks: I've started zapping off a canned "Here's how to unsubscribe" > sheet to these folks, you can ignore 'em if you want to (On > re-reading it, maybe I should "this might get you off" and "very slow" > to WON'T and WON'T?) Need a PIC tool to do this Maybe that'll be > rev. 2 on the Keydler or something. > > Mark, mwillis@nwlink.com, who speweth (all too) regularly: > --- Begin Paste --- > > HOW TO UNSUBSCRIBE > > There is one way that works to get off the list. DO NOT post to the > list. This might get you off, but is the worst way to do it; A post to > the list goes to all subscribers, is VERY slow and gets everyone angry > with you. If the administrator misses seeing it (and he DOES NOT read > the list!), you don't get off the list. > > Do NOT post to me requesting an unsubscribe. I CANNOT unsubscribe > you. I will simply delete your request. YOU and only you can > unsubscribe yourself. > > Post to: > > LISTSERV@MITVMA.MIT.EDU (i.e. mailto:LISTSERV@MITVMA.MIT.EDU) > > from the address at which you are subscribed containing nothing but > > unsubscribe PICList > > in the first line of the message, from the address at which you are > subscribed. This is automatically executed and is the fastest method. > The message must contain the exact words "unsubscribe PICList", no > other spelling works. > > If you are trying to unsubscribe from an address different from the > one you subscribed from, you must include that original address like > this: on the first line of the message: > unsubscribe PICList > > Good luck! > > Mark Willis, mwillis@nwlink.com > --- End Paste --- -- Peter Williamson | Phone: +61 15 898934 Waybeat Pty Ltd | Email: peterw@waybeat.com.au