What am I doing wrong? this should be the simplest start...turn all port b
pins on.

Code:

0000    MOVLW   00
        MOVWF   0A
        GOTO    005
        NOP
        NOP
0005    CLRF    04
        CLRF    03
        MOVLW   07
        MOVWF   1F
0009    BSF     03,5
        CLRF    06
        MOVLW   FF
        BCF     03,5
        MOVWF   06
        GOTO    009


Using a 16C622, wired trivially:

pin 4 1K to Vcc, .1uF to Gnd
pin 5 gnd
pin 14 to TTL clock module, 10MHz
pin 12 to +5

looking at pins 6-13...all have about .25 v on them, but won't sink an LED
(with 1K res).

Help?

(I don't have a scope, but im pretty sure the power is clean - 7805 with
appropriate filtering off a wall wart)