Yes it will program it. The 10 mhz is the max freq the part is
quaranteed to work at.

Cranston Grey wrote:

> I recently ordered a couple of 16F84 to attempt my first PIC project.
> JDR sent me 10mhz version instead of 4. I plan to breadboard then build
> a simple programmer.
>
> My question is: will simple programmers like david Tait's work with the
> 10mhz clock speed. I have spent some time on the web looking for an
> anwser, but it's not spelled out anywhere.
>
> Thanks.
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com



--

From: Ron Russ
   EMICROS  - Embedded Micro Software
  (http://www.emicros.com)
   CANPORT  - Lowest cost PC to Controller Area Network Adapter
  (http://www.emicros.com/canport.htm)
   CANTEC11 - 68HC11 SBC with Controller Area Network
  (http://www.emicros.com/cantec11.htm)