i have a www.needhams.com emp20 programmer. you could download the software and use it in demo mode to edit files. this would allow you to read or write a number of different formats. michael -----Original Message----- From: Dr. Imre Bartfai To: PICLIST@MITVMA.MIT.EDU Date: Thursday, August 27, 1998 1:07 AM Subject: Re: [OT] looking for Intel-Hex-Editor >Hi, > >I have seen in the PIC world anywhere the following utilities: > >BIN2HEX and HEX2BIN. > >So you can convert your HEX to BIN, edit it, then convert back. > >Imre > > >On Wed, 26 Aug 1998, M.Schmaeche wrote: > >> Hi folks, >> >> I'm looking for an Intel-Hex-Editor which I can use for editing a >> complete programmer Hex-File in order to change some customer dependent >> data. >> >> Of course I know what entries an Intel-Hex-File consists of but I don't >> like to calculate the checksum manually. So I suppose there should >> already exist a utility like an ordinary Hex-Editor which automatically >> calculates the checksum. >> >> Unfortunately I couldn't find one yet. So any hint will be appreciated >> highly (shareware or freeware preferred)! >> >> Best regards, >> Marc Schmaeche >> >> ----------------------------------------------------------------------- >> DESCON Informationssysteme GmbH >> >> Dipl.-Ing. M.Schmaeche Tel.: +49 (0)9131 691145 >> Abt. Elektroniksysteme Fax: +49 (0)9131 691166 >> Am Weichselgarten 7 E-Mail: mailto:schmaeche@descon.de >> 91058 Erlangen, Germany (German/English/Spanish welcome) >> ----------------------------------------------------------------------- >> >> >