Vcc = + 5 Volts. I'm also don't remember acronyms!!! ;)


> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Joshua M. Free
> Sent: Viernes 21 de Agosto de 1998 17:08
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: Newbie Question
>
>
> On Fri, Aug 21, 1998 at 04:46:27PM -0300, Ricardo Seixas wrote:
> > >I've done simple sanity checks like removing the chip and connecting
> > >the +5V that was going to pin 14 directly to both of the wires
> that would
> > >connect to pins 2 and 3 to make sure the circuits complete.
> >
> > Is MCLR (pin4) connected to VCC ?
>
> VCC? Looking at my documentation I can't find a VCC.
>
> Here's the pin layouts:
> RA2/AN2       -> 1
> RA3/AN3/Vref  -> 2
> RA4/T0CKI     -> 3
> MCLR/Vpp      -> 4
> Vss           -> 5
> RB0/INT       -> 6
> RB1           -> 7
> RB2           -> 8
> RB3           -> 9
> RA1/AN1       -> 18
> RA0/AN0       -> 17
> OSC1/CLKIN    -> 16
> OSC2/CLKOUT   -> 15
> Vdd           -> 14
> RB7           -> 13
> RB6           -> 12
> RB5           -> 11
> RB4           -> 10
>
> --
> Joshua M. Free  <josh@eboai.org>  (JMF30)  http://www.eboai.org/~josh/
> Art washes away from the soul the dust of everyday life - Pablo Picasso
>