At 00:02 19.08.98 -0400, you wrote:

Hi,

>basicly Im only getting the 9th bit and I dont know why.  all I get on my
>LCD is 0's and 5's
>this is the 9th bit ... if the 9th bit is 1 it sends a 5 and if the 9th bit
>is 0 it sends a 0, after the decimal.
>

it seems that you access the LM75 with two readcycles but divided by a
stop/start-condition.

For getting the full 9Bits you need two consecutive readcycles ! Have a look
at the datasheet.

Hope that helps

Thomas
=8-)

--

**********************************************************
* Thomas Magin                  FON:   ++49-761-4543-489 *
* marquette-Hellige GmbH        FAX:                -507 *
* E-FW / Emergency Systems      email: magin@hellige.de  *
* Munzinger Str. 3                                       *
* D-79111 Freiburg / Germany                             *
**********************************************************