At my www page (see below) you can find completely redesigned hardware for
PICALL - PIC programmer. With this hardware all PICs listed below (up to 40
PIN) can be programmed without an adapter in 40 PIN ZIF socket.

      With PICALL following devices can be programmed by now:

PIC16C54, PIC16C55, PIC16C56, PIC16C57, PIC16C58
PIC12C5xx, PIC14000, PIC16C554, PIC16C556, PIC16C558, PIC16C61, PIC16C62,
PIC16C62A, PIC16CR62, PIC16C63, PIC16C64, PIC16C64A, PIC16CR64, PIC16C65,
PIC16C65A, PIC16C66, PIC16C67, PIC16C620, PIC16C621, PIC16C622, PIC16C710,
PIC16C71, PIC16C711, PIC16C72, PIC16C73, PIC16C73A, PIC16C74, PIC16C74A,
PIC16C76, PIC16C77, PIC16F83, PIC16CR83, PIC16C84, PIC16F84, PIC16CR84,
PIC16C923, PIC16C924, PIC16C642, PIC16C662, PIC16C715

and you can simply add new devices by changing DEVICE.INI file:
(you must enter program size, data size, fuses type and algorithm type)

Bojan Dobaj


|------------------------------------------------------|
|                        EMAIL:                        |
|  bojan.dobaj@bigfoot.com  OR  bojan.dobaj@uni-mb.si  |
|                                                      |
|                      HOME PAGE:                      |
|              P16PRO low cost middle range            |
|             PIC microcontrollers programmer          |
|                                                      |
|  http://www.geocities.com/SiliconValley/Peaks/9620/  |
|------------------------------------------------------|